INCH-POUND
MIL-DTL-15024/4A(AS)
27 March 1998
SUPERSEDING
MIL-P-15024/4(AS)
19 May 1971
DETAIL SPECIFICATION SHEET
MODIFICATION IDENTIFICATION PLATE
This specification is approved for use by the Department of the Navy and is available for use by all
Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification
sheet and MIL-DTL-15024.
REQUIREMENTS:
Type. The identification device shall be selected to match the application, the operational
and maintenance environments of the product it identifies. Type A, G or H shall be used.
Color Style. The color style selected shall be III or IV. The color style shall comply with
operational and tactical requirements.
Size. Size 3 is the preferred size for modification identification plates. Other sizes may be
used or dimensional changes for an increased number of entries may be made when design
requirements indicate this need.
Material. The material shall be compatible with the operational and maintenance
environments of the end item.
Serial Number. The serial number on the modification identification plates shall be the same
as the number which was assigned to the original equipment. The serial number shall be included
on the plate as shown.
Mounting. Plates requiring mechanical fasteners shall be mounted by removable screws and
lockwashers or locknuts.
AMSC N/A
1 of 2
FSC 9905
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business