NOT MEASUREMENT SENSITIVE
MIL-DTL-20633D
14 January 2000
SUPERSEDING
MIL-S-20633C
16 February 1989
DETAIL SPECIFICATION
SIGNS AND MARKER, ALUMINUM;
MINED AREA MARKING
This specification is approved for use by all Departments and Agencies of the Department
of Defense.
1. SCOPE
1.1 Scope. This detail specification covers safe-lane and mined-area marking signs and a mine
marker.
1.2 Classification. The signs and markers should be of the following classes as specified
(see 6.2(b)).
Class D - Safe-lane sign
Class E - Mine marker
Class F - Mined area sign
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents in other sections of the specification or
recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
specified requirements documents cited in sections 3 and 4 of this specification, whether or not
they are listed.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which
may be used in improving this document should be addressed to: Defense Supply Center
Richmond (DSCR), ATTN: DSCR-VBD, 8000 Jefferson Davis Highway, Richmond, VA
23297-5610 by using the Standardization Document Improvement Proposal (DD Form 1426)
appearing at the end of this document or by letter.
AMSC N/A
FSC 9905
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business