A-A-2129
February 21, 1984
COMMERCIAL ITEM DESCRIPTION
REFLECTOR, INDICATING, CLEARANCE
The General Services Administration has authorized the
use of this commercial item description in
preference to Military Specification R-12144, types I
and II.
This description covers a plastic reflector assembly, composed of a reflecting element and a backing, mounted within a metal flange, for use on vehicles and trailers.
Reflectors shall be furnished with reflecting elements in the following colors, as specified:
Type I – Red
Type II – Amber
Salient characteristics:
Perimeter shall be ellipsoidal in shape
Plastic reflector
Reflecting element
Backing
Shall be mounted with a metal flange
Two mounting holes, 9/32 inch diameter
Dimensions and configuration shall conform to Figure 1
Conformance. Reflectors furnished under this description must comply with the requirements of the Code of Federal Regulations (CFR) Chapter V, 571.108 – Standard No. 108 or Department of Transportation, Federal Motor Vehicle Safety Standard (FMVSS) No. 108.
Preservation, packaging, packing, labeling, and marking. The preservation, packaging, packing, labeling, and marking shall be as specified in the contract or order.
Notes:
The commercial item certification clause is not required when this commercial item description is used for procurement.
Purchaser shall specify type when ordering.
Copies of the Code of Federal Regulations (CFR) and Department of Transportation, Federal Motor Vehicle Safety Standards are available from the Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business