INCH-POUND
MIL-DTL-15024/1B(AS)
27 March 1998
SUPERSEDING
MIL-P-15024/1A
5 February 1973
DETAIL SPECIFICATION SHEET
SET OR GROUP IDENTIFICATION PLATE
This specification is approved for use by the Naval Air Systems Command, Department of the
Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification
sheet and MIL-DTL-15024.
REQUIREMENTS:
Type. The identification device shall be selected to match the application, the operational
and maintenance environments of the product it identifies. It shall be type A, B, or H for the
Navy or aluminum alloy type A or B for electronic test equipment nomenclature and identification
plates for the Air Force.
Color Style. The color style shall comply with operational requirements. The color style
selected shall be style III or IV.
Size. Set and group identification plates shall be size 6.
Material. The material shall be compatible with the operational and maintenance
environments of the item to which it is attached .
Serial Number. The serial number shall be marked directly on the equipment below the set or
group identification plate.
Serial number plate. When it is impractical to mark the serial number directly on the
equipment, a separate plate containing the serial number shall be permanently attached to the
equipment below the set or group plate. The serial number plate shall be made of the same
material as the applicable set or group identification plate.
AMSC N/A
1 of 3
FSC 9905
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business