INCH-POUND
MIL-DTL-15024/3A
27 March 1998
SUPERSEDING
MIL-P-15024/3
19 May 1971
DETAIL SPECIFICATION SHEET
IDENTIFICATION CABLE BAND
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
The requirements for acquiring the identification cable band described herein shall consist of this
specification sheet and MIL-DTL-15024.
REQUIREMENTS:
Type. The identification device shall be selected to match the application, the operational
and maintenance environments of the product it identifies. Type K1 shall be used.
Color. Style. The color style selected shall comply with operational requirements.
Size. Identification cable bands shall be not more than 3/4 inch wide and shall have a length
consistent with the size of the cable or wire bundle to which it will be attached.
Format and information. Typical format and information are as shown.
Changes from previous issue Marginal notations are not used in this revision to identify
changes with respect to the previous issue due to the extent of the changes.
AMSC N/A
1 of 2
FSC 9905
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business