MIL-DTL-20633D
4.4 Inspection of packaging. The fully packaged end items shall be examined for compliance in
accordance with section 5.1. Sampling shall be in accordance with ANSI/ASQC Z1.4. The unit
of product shall be a completed pack prepared for shipment. The lot size will be specified by the
contracting officer.
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the
contract or order (see 6.2(g)). When actual packaging of material is to be performed by DoD
personnel, these personnel need to contact the responsible packaging activity to ascertain requisite
packaging requirements. Packaging requirements are maintained by the Inventory Control Point's
packaging activity within the Military Department or Defense Agency, or within the Military
Department's System Command. Packaging data retrieval is available from the managing Military
Department's or Defense Agency's automated packaging files, CD-ROM products, or by
contacting the responsible packaging activity.
6. NOTES
6.1 Intended use. The class D sign is intended for marking a safe lane through a mined area. The
class E mine marker is intended for marking the location of a detected mine until removal is
accomplished. The class F sign is intended for marking mined areas.
6.2 Acquisition requirements. Acquisition documents must specify the following:
a. Title, number, and date of this document
b. Class of sign or marker required (see 1.2)
c. Issue of DoDISS to be cited in the solicitation, and if required, the specific issue of
individual documents referenced (see 2.2.1)
d. First article, if required (see 3.1)
e. First article examination responsibility, if different (see 4.2)
f. Quality conformance lot size, specify requirements (see 4.3)
g. Packaging requirements (see 5.1)
6.3 Part identification number (PIN). The PIN to be used for signs and markers acquired to this
specification are created as follows:
M
20633-
X
Prefix for military
Specification number
Class
specification
6.4 Subject term (key word) listing.
Safe-lane
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business