INCH-POUND
MIL-DTL-15024F
28 November 1997
SUPERSEDING
MIL-P-15024E
29 January 1993
DETAIL SPECIFICATION
PLATES, TAGS, AND BANDS FOR IDENTIFICATION
OF EQUIPMENT, GENERAL SPECIFICATION FOR
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This performance specification covers the physical characteristics of plates, tags
and bands (identification devices) used for identification of equipment. Examples of information
to be marked on the identification devices are covered in the applicable specification sheets.
1.2 Classification. Identification devices will be one of the following types, as specified (see
6.2):
Type A
Etched or chemically engraved plate
Type B
Engraved plate
Type C
Stamped plate
Type D
Cast plate
Type E
Screen or litho print plate
Type F
Laminated plate
Type G
Adhesive-backed plate
Type H
Photosensitive plate
Type J
Tag
Type K1 Cable Band
Type K2 Cable Band (Heat shrinkable)
Type L
Laser generated plate
Beneficial comments (recommendations, additions, deletions) and any pertinent data which
may be of use in improving this document should be addressed to: Commander, Naval Air
Warfare Center Aircraft Division, Code 414100B120-3, Highway 547, Lakehurst, NJ
08733-5100, by using the Standardization Document Improvement Proposal (DD Form 1426)
appearing at the end of this document or by letter.
AMSC N/A
FSC 9905
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business