MIL-DTL-15024F
3.3.1.2 Recycled, recovered, or environmentally preferable materials. Recycled, recovered,
or environmentally preferable materials should be used to the maximum extent possible provided
that the material meets or exceeds the operational and maintenance requirements, and promotes
economically advantageous life cycle costs.
3.3.2 Color style. The background and character color of the identification device shall
comply with the requirements of the applicable specification sheet and with the color styles in
table I (see 6.2). When a color style is not specified for identification devices used on electronic
equipment, style III shall be used. The color numbers of FED-STD-595 shall be used as a color
comparison when anodic coatings and finishes are used other than paint, enamel, lacquer, or
varnish.
3.3.2.1 Opacity. The opacity of the paint and ink used for marking shall completely cover
the background color.
3.3.3 Finishes. All front surfaces shall be matte, satin (line), or semi-gloss, as the type of
material or finish thereon permits.
3.3.3.1 Gloss. The surfaces of non-metallic plates shall have a specular gloss of 25 +10,
except that adhesive backed type F plates may be designated as lusterless with a gloss of 6 or less,
or gloss with a specular gloss of 40 or more (see 4.3.1.10).
3.3.4 Plate size. The size of the identification device shall be as specified in the specification
sheet. When the size is not specified, a size compatible with the equipment on which the
identification device will be attached shall be used (see 6.2). For plates with dimensions given in
table II, the number, size, and location of mounting holes shall comply with the guidance
contained in table II. Plates using an adhesive for mounting shall not have mounting holes. Sizes
for type G plates may be other than the sizes given in table II.
3.4 Specific physical properties. The following information is provided for guidance in
selecting materials used for the different types of identification devices. Where detail
specifications are listed, it is for guidance and materials of similar properties may be used.
3.4.1 Type A.
3.4.1.1 Materials. The following materials are recommended, but are not mandatory:
a. Brass.
b. Corrosion resistant steel.
c. Aluminum alloy.
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business