MIL-DTL-15024F
3.4.6 Type F.
3.4.6.1 Materials. Type F plates shall be made from a laminated, transparent, non-metallic
material.
3.4.6.2 Marking method. Characters shall be included between the laminations and shall be
clearly visible through a transparent outer layer. Additional information may only be permanently
stamped on type F plates with a thickness of 0.03 inch or greater (see 3.2.1.1).
3.4.6.3 Dimensions. Fasteners shall only be used on type F plates with a thickness greater
than 0.03 inch. For plates using adhesives, the thickness shall be not less than 0.006 inch or be
not greater than 0.025 inch.
3.4.7 Type G.
3.4.7.1 Materials. Material shall be an adhesive backed metal foil. Materials listed in
MIL-P-19834 are recommended, but not mandatory. Other materials may be used if they meet
the requirements of this document.
3.4.7.2 Marking method. All characters shall be integrated into the plate. Whatever process
(screening, anodizing, chemical etching, or photographic process) is used, the device shall meet
the durability requirements for the application. Additional information may be added by a
typewriter or serializing device which will not break through the foil or produce an impression or
raised surface which would affect the adhesive qualities of the plate.
3.4.8 Type H.
3.4.8.1 Materials. Photosensitive, anodized aluminum alloy in accordance with GG-P-455
shall be used except the thickness shall be as specified in 3.4.8.3. Plates may be mounted by
fastener devices or by an adhesive.
3.4.8.2 Marking method. Characters shall be integrated into the material by using
compounds. Type H plates, subjected to sunlight and high temperatures, shall use a silver
compound that is fade resistant. Additional marking information may be permanently stamped
(see 3.2.1.1).
3.4.8.3 Dimensions. The thickness of type H plates shall be not less than 0.02 inch for plates
using fasteners. For plates using adhesives, the thickness shall be not less than 0.012 inch and not
greater than 0.025 inch.
3.4.9 Type J.
10
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business