INCH-POUND
MIL-DTL-19834C
6 July 2006
SUPERSEDING
MIL-P-19834B
7 November 1972
DETAIL SPECIFICATION
PLATES, IDENTIFICATION OR INSTRUCTION, METAL FOIL, ADHESIVE BACKED
GENERAL SPECIFICATION FOR
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1. SCOPE
1.1 Scope. This specification covers adhesive-backed metal foil identification or instruction
plates, herein referred to as identification plates, for use as internal and external equipment
identification or instruction (see 6.1).
1.2 Classification. Metal foil identification plates will be furnished in the following types, as
specified (see 6.2)
Type I - Aluminum foil, pressure sensitive, easily removable liner.
Type II - Aluminum foil, adhesive-backed solvent-activated film.
Comments, suggestions, or questions on this document should be addressed to: Defense
Supply Center Philadelphia, ATTN: DSCP-NASA, 700 Robbins Ave, Philadelphia, PA
19111-5096 or emailed to dscpg&ispeccomments@dla.mil. Since contact information can
change, you may want to verify the currency of this address information using the ASSIST
Online database at https://assist.daps.dla.mil/
AMSC N/A
FSC 9905
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business